Energy, Anytime, Anywhere
Chargers, Inverters, Inverter Chargers, Batteries
Commercial Shipping Battery Charger Solutions
Off-Grid and Solar Energy
Victron Solar controllers and inverter chargers provide off-grid energy solutions worldwide
RV Home comforts
Victron energy solutions for vehicles provide everything from charging solutins for mobility scooters to full home comforts on the move in RVs and long distance trucks
Previous
Next

Victron Energy

The global market leader in power solutions for marine, industrial, automotive, mobility, off-grid and solar markets. Based in The Netherlands, Victron provides leading edge technology with reliable quality based on extensive testing and product support. 

Charge and Convert:

AUTOTRANSFORMER
For step up, step down and split phase balancing
An Autotransformer can be used for step up, step down and split phase output balancing purposes.
While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention.

CHARGERS
Phoenix Charger – 12 / 24 Volts
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz.
Skylla-i – 24 Volt
A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air.
Skylla-TG Charger – 24 / 48 Volt
One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system.
Skylla-TG GMDSS – 24 Volt
The Victron Skylla-TG 24/30 and 24/50 GMDSS Chargers have been designed to provide all required monitoring and alarm data.
Centaur Charger – 12 / 24 Volt
The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.
Skylla-IP44 – 12V/60A & 24V/30A
The Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.
Blue Smart IP22 Charger – 12V 15/20/30A, 24V 8/12/16A
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth.
Blue Smart IP67 Charger Waterproof – 12V 7/13/17/25A, 24V 5/8/12A
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth.
Blue Smart IP65 Charger (120V and 230V) – 12V 4/5/7/10/15A, 24V 5/8A
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth.
Automotive IP65 Charger – 6 / 12 Volt
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

INVERTERS:
Phoenix Inverter – 3000VA – 5000VA
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
Phoenix Inverter Compact 1200VA – 2000VA – 12 / 24 Volt
The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications. The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
Phoenix Inverter Smart 1600VA & 2000VA
Bluetooth built-in: fully configurable with a tablet or smartphone
– Low battery voltage alarm – Low battery voltage cut-off and restart levels – Dynamic cut-off: load dependent cut-off level – Output voltage: 210 – 245V
– Frequency: 50 Hz or 60 Hz – ECO mode on/off and ECO mode sense level – Alarm relay
Phoenix Inverter 180VA-1200VA – 12 / 24 / 48 Volt
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load.
Phoenix Inverter VE.Direct – 250VA, 375VA, 500VA, 800VA, 1200VA
nverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

INVERTER/CHARGERS
MultiPlus 500VA, 800VA, 1200VA
The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
MultiPlus – 800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA
he MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
MultiPlus-II – 3000VA – 5000VA, 48 Volt
The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).
MultiGrid – 3000VA
MultiGrid smooths out the risk of grid instability and energy costs by utilising energy storage and self-consumption.
Quattro – 3000VA, 5000VA, 8000VA, 10000VA, 15000VA
Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.
ECOmulti – 24 Volt
The ECOmulti can be wall mounted, is easy to install, easy to program and easy to operate. With 2,3 kWh Li-ion storage capacity and a 3 kVA bidirectional inverter, the ECOmulti reduces dependence on power from the grid.
EasySolar – 12/24/48 Volt
The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
EasyPlus – 12 Volt
The EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure.

ISOLATION TRANSFORMERS
Isolation Transformers – 2000VA / 3600VA / 7000VA
Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.
Galvanic Isolator VDI-16 and VDI-32
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

VICTRON - CHARGE AND CONVERT
PHOENIX CHARGER
SKYLLA-i CHARGER
CENTAUR CHARGER
BLUE SMART IP22
PHOWNIX INVERTER V.E. DIRECT
MULTIPLUS
MULTIGRID
QUATTRO
EASYSOLAR
EASYPLUS
AGM BATTERY
VICproducts-nav-battery
LITHIUM BATTERY
LITHIUM 24V
BMV 712 SMART
PEAK POWER PACK
BATTERY BALANCER

BATTERIES:

AGM BATTERIES
The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.
LITHIUM BATTERIES:
The Victron Lithium-ion battery system is comprised of a very modern battery with an advanced control- and security system; the so-called Battery Management System (BMS). The BMS controls the charging and discharging, immediately takes action when certain (critical) values are exceeded and safeguards an efficient energy transfer.
Lithium battery 12,8V & 25,6V Smart
– With integrated cell balancing – Can be parallel and series connected – Bluetooth app available to monitor cell voltage and temperature
Lithium battery 24V
The market for battery systems is developing rapidly. There is a growing demand for efficient batteries with a large energy density. Victron Energy has a suitable answer to this demand: the Victron Lithium-ion battery system. This is comprised of a very modern battery with an advanced control- and security system; the so-called Battery Management System (BMS). The BMS controls the charging and discharging, immediately takes action when certain (critical) values are exceeded and safeguards an efficient energy transfer.

BATTERY MANAGEMENT:
BMV-700 series
The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
BMV-712 Smart
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

PEAK POWER PACK
The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the car electrical system during the travel with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.

BATTERY BALANCER
The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.

SOLAR:

SOLAR CHARGE CONTROLLERS
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
Victron feature a wide range of both MPPT and PWM solar charge controllers. In the MPPT model names, for example MPPT 75/50, the first number is the maximum PV open circuit voltage. The second number, 50, is the maximum charge current.
SmartSolar MPPT 75/10, 75/15, 100/15 & 100/20 – 12/24 Volt
SmartSolar MPPT 100/30 & 100/50 – 12/24 Volt
SmartSolar MPPT 150/35 – 12/24/36/48 Volt
SmartSolar MPPT 150/45 up to 150/100 – 12/24/36/48 Volt
SmartSolar MPPT 250/60 up to 250/100 – 12/24/36/48 Volt
BlueSolar MPPT 75/10, 75/15 & 100/15 – 12/24 Volt
BlueSolar MPPT 100/30 & 100/50 – 12/24 Volt
BlueSolar MPPT 150/35 up to 150/100 – 12/24/36/48 Volt
BlueSolar PWM – 12/24/48 Volt
BlueSolar MPPT 150/70 & 150/85 – 12/24/36/48 Volt

INVERTER/CHARGER/MPPT
EasySolar – All-in-one solar power solution
The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Models: 12/24/48 Volt

SOLAR INVERTERS – ECOmulti 24v
The ECOmulti can be wall mounted, is easy to install, easy to program and easy to operate. With 2,3 kWh Li-ion storage capacity and a 3 kVA bidirectional inverter, the ECOmulti reduces dependence on power from the grid.

SMART SOLAR MPPT
ECOMULTI
COLOR CONTROL GX

MONITORS CONTROLLERS AND ACCESSORIES:


PANEL AND SYSTEM MONITORING
DC DISTRIBUTION SYSTEMS
TRANSFER SWITCHES
CABLES & ACCESSORIES