COOLING TECHNOLOGY
Energy is a precious resource on board of any boat or yacht. Indel Webasto Marine continuously improves its energy management solutions to provide better efficiency and clever power savings to customers.
SUNNY DAYS AND COLD DRINKS...
Isotherm Fridges & Freezers - reliability under tough marine conditions. Icemakers and Wine Fridges
Isotherm Fridges and Freezers
Built in or Stand Alone
Built in Top Load Boxes
Isotemp water heaters
The marine water heaters are very robust, both the water tank and external cylinder are made of stainless steel in Basic and Slim models while new SPA range features the same internal tank in stainless steel and an outer casing made of high quality polypropylene.
Previous
Next

INDEL WEBASTO REFRIGERATION 

Indel Webasto Marine, based in St. Agata Feltria in Italy, is the successful Joint Venture between the Italian refrigeration leader Indel B who make Isotherm Fridges and Freezers and Isotemp Marine Water Heaters and the leading automotive supplier Webasto, based in Germany. These two companies joined forces to bring high quality galley equipment solutions to marine applications. Indel Webasto Marine stands for high quality products in the marine industry.

Cooling, how does it work?

A refrigerator does not produce cold but removes heat. An effective means of getting rid of this heat is critical for the refrigerator’s performance and energy consumption. Isotherm refrigeration systems use either air or sea water to remove heat.
Isotherm – Three possible cooling systems
Indel Webasto Marine provides different solutions for best cooling performances, to suit every demand. For efficient heat removal, various methods can be applied. Isotherm cooling systems use air or sea water to eliminate heat.
Air Cooling
Using air which is blown through the condenser by a fan is the traditional way to remove heat. It is important that the compressor compartment is well ventilated allowing cold air to enter from below and hot air to escape to the top.
Magnum Seawater-Cooled Electric Pump
Isotherm Magnum cooling systems are especially designed for vessels with high refrigeration requirements, for example sailing in tropical waters. Isotherm Magnum uses the surrounding water to increase cooling efficiency. All Magnum models are fitted with integral seawater pumps for circulating cooling water through the cooling section of the refrigerator compressor. The pump is quiet, self-priming, it withstands dry running and it’s self-aerating. The highly efficient heat exchanger is manufactured in a corrosion-resistant copper-nickel alloy and fitted with a zinc anode. Seawater-cooled units are extremely efficient and offer increased cooling capacity.
Self-Pumping (SP) Seawater-Cooled
Isotherm SP systems cool with the use of surrounding water. This means that refrigeration efficiency is completely independent from the air temperature inside the boat. Even on the hottest summer days, just when a refrigerator is needed most, water-cooled Isotherm SP operates consistently at an extremely high level of efficiency. With no fans nor pumps to remove the heat generated by the refrigeration compressor, the SP System consumes much less battery power and is remarkably quiet. Although heat always rises if left to the laws of nature, the Isotherm SP unit uses the natural movement of the hull to draw heat down and out through a special fitting in the galley sink drain hose.
As this hose is not restricted by pumps nor non-return valves, the flow inside is completely free. Each movement of the water surrounding the boat produces a similar change of the water level inside the hose resulting in the pumping of a similar quantity of water in and out through the hull fitting. By designing a special hull fitting containing a non-restricting, full-flow spiral heat exchanger for cooling the heated refrigeration agent, an extremely efficient cooling system is created. As the hull fitting is always situated some distance from the boat’s centre of gravity, even the smallest movement of the hull or mast of a sailing boat is sufficient to create a pumping action. This movement, by which warm water is continuously pumped out and cold water in, also prevents fouling. The through-hull fitting is made of saltwater resistant brass and the full-flow coil heat exchanger is of copper-nickel alloy. A zinc anode is fitted as standard.

Cruise Fridges:

Isotherm refrigerators and freezers are the result of careful research. Marine refrigerators operate under tough conditions: they must withstand violent movements, operate noiselessly, be thoroughly reliable and, perhaps the most important of all, consume an absolute minimum of battery power.
CRUISE Fridges
36 Litre to 271 Litre Capacity
Isotherm Marine Refrigerators and Freezers come in 4 distinct styles to suit your design and cruising preferences:
Cruise Classic (panels to match your interiors)
Cruise Elegance (extra insulation for more efficiency)
Cruise Stainless Steel (INOX) for the ultimate in upscale refrigeration
Drawer Refrigerators and Freezers for convenience and innovative design
Isotherm also has a size to fit the most challenging space requirements:
Small refrigerator sizes with remote-mount compressors to fit under seats and spaces with minimum depth
Built in refrigerators of medium sizes for smaller boats that want more storage in a small footprint
Under counter fridge of larger sizes that provide maximum storage for under counter installations
Side by side refrigerators and bottom freezer refrigerators in Extra large sizes to provide the most storage capacity for larger boats.
CRUISE Elegance refrigerators: Combination of style & technology!
Elegance fridges feature an innovate internal anchoring system which allows the fridge to be installed either flush mount or proud mount without a flange.
The Cruise Elegance line is the next generation of Isotherm Marine Refrigerators that are designed to increase efficiency and deliver greater performance in the marine and mobile environments. The Elegance line is available standard with Silver or Black doors that are two inches thick. This provides greater insulation where it is most critical. The silver color reflects sun heat and brushed aluminum panel has the appearance of stainless steel without the cost. The Elegance Black comes standard with mounting flange and economical pricing. Elegance doors are durable and easy to maintain.
A magnetically sealed freezer compartment adds to the efficiency and performance characteristics of the Elegance Line by locking out frosting issues. With their ‘right size’ freezer dimensions, Elegance fridges allow storage of more food and beverages. The compact freezer size also allows for storage of tall bottles on the smaller fridges where bottles can stand upright on interior shelves.
CRUISE ELEGANCE marine refrigerators are available in five sizes from 42 liters up to 130 liters capacity. The new Elegance line of mobile and marine refrigerators enhances the Isotherm mission to design and build high-quality and energy efficient refrigerators that can withstand the rigors of off-road and marine environments.
The Isotherm Elegance line of refrigerators was designed for easy integration of the Isotherm Smart Energy Control (ISEC) which reduces battery consumption by up to 50% under typical cruising and driving conditions. ISEC installation instructions (for Danfoss/SeCOP DC only modules), panel customization, door swing instructions, and more can be found online at the Indel Webasto Marine channel on YouTube or the video turtorial page.
Product highlights
2-inch thick doors improve insulation, reduce compressor run time
Door panel and handle can be customized in a few minutes. Optional panels include teak, white, and black
A new, ergonomic handle allows easy door opening and change of swing
Branding / Logo on handle can be implemented on request with large orders
Perfect integration with the on board design
Lowest power consumption on the market
Isotherm Smart Energy Control ready (fits on Danfoss/SeCOP DC modules only)
Easy to install
Reliability conjugated to a service throughout the world
CRUISE Stainless Steel Marine Refrigerators
Isotherm Cruise INOX Stainless Steel and CLEAN TOUCH Stainless Steel Marine Refrigerators combine technological innovation with sophisticated, yet practical design for the marine environment. Cruise Stainless Steel refrigerators are available from 36 liters up to 320 liters (1.3 cubic feet to 11 cu. ft.) and provide numerous customization options: right hand or left hand opening; DC-only or AC/DC.
Isotherm Marine Refrigerators feature superior storage capacity; marine features like cradles and adjustable holders to keep bottles and jars secure and upright; and are backed by the exclusive Isotherm 5-Year Limited Warranty on the compressor and two-year warranty on all other parts.
The Isotherm Cruise 130 Elegance Clean Touch Stainless Steel is the latest development in the Cruise Elegance line. The new Isotherm Clean Touch stainless steel is specially treated to remain clean to the touch and resist the rigors of the marine environment. The Clean Touch has excellent scratch and abrasion resistance as well as resistance to stains. As the premier marine refrigeration brand, the Isotherm Clean Touch provides excellent resistance to salt spray, sun, heat, UV, and condensation in the marine environment.
Like the original Elegance doors, the new Isotherm Clean Touch door is thicker than traditional doors which results in lower power consumption, greater energy efficiency, and superior performance. The wider, more ergonomic, center handle and door design allow for easy swing change from right to left swing.
The new Isotherm Clean Touch Stainless Steel doors are available on five models: 42, 49, 65, 85 and 130 liters. These models represent the most common cutout dimensions in the marine and mobile industry, making the upgrade to the new Clean Touch simple and easy.

Combinations: Thanks to the modular concept, different combinations can be accomplished, always based on an elegant stainless steel flush frame that surrounds solutions. Interesting hybrid mix are now possible, by composing as a unique frame fridge or freezers, as well as standard front door opening up to state of the art drawer units. Available on 220 (Cruise Fridge/Freezer) 260 (Cruise Fridge/Drawer Fridge) and 320 liters (Cruise 160 Fridge/Double Drawer 160, as per current model range) the series will be soon implemented by increasing products and possible combinations. Stainless steel finishing with special flush flange supplied as standard.

 

CRUISE 36
CRUISE-40
Cruise 42 elegance
Cruise 65 Classic
CRUISE 85 Elegance
Cruise 90 Classic
Cruise-100-Classic.
Cruise 115-Elegance
CRUISE 130 inox clean touch
cruise-165 Elegance
Cruise-195-inox.
CRUISE 200 inox
Cruise combi 260 Inox
cruise-63 Classic
cruise-63-f-inox
cruise-65 Classic
cruise-65-f-inox
Cruise 90 Inox

Cruise Freezers:

These units are the perfect complement to CRUISE refrigerators. The high-quality freezers ensure the perfect and constant temperature to deep-freeze food on board.
Product specifications
Extra thick insulation for excellent cooling performance and low power consumption
12/24 V Danfoss compressor (AC/DC power kit optional)
Door with a safety lock and magnetic rubber seal
Excellent solution for a side by side fridge-freezer application
Choose your new CRUISE freezer out of two design options: 
CRUISE Classic freezers (63/65/90 liters)
CRUISE INOX freezers (63/65/90 liters)
CRUISE 63 Freezer: The CR 63 Freezer has the same outside dimensions as CR 85 fridge. Therefore these units can be perfectly mounted side by side. CR 63 F is equipped with two shelves and a bin at the bottom. It has a corner-mounted compressor and the evaporator piping is integrated in the walls.
CRUISE 65 Freezer: The CR 65 Freezer is a 65 liters volume freezer with extra thick insulation. It is equipped with one shelf and a bin at the bottom. The CR 65 F is delivered with a fan-cooled compressor.
CRUISE 90 Freezer: The CR 90 Freezer has the same outside dimensions as the CR130 fridge. Therefore these units can be perfectly mounted side by side. The CR 90 F is equipped with three shelves and four separate lids. It is delivered with a fan-cooled compressor.

 

Drawer Fridges and Freezers:

The convenient drawer openings allow an easy access to food and drinks. An extraordinary stylish design rounds up these highly functional units.
Isotherm drawer fridges and freezers stand for great design and user-friendliness. High-quality material and robust construction ensure long life time.
Product specifications
High-tech design ; Easy user-friendly access
Freezer compartment ; Robust drawer mechanism
Off-shore lock for perfect closure at any time
Unique frost-free feature for the DR 55 and DR 65
Drawer 16 Silver: The smallest and lightest drawer unit available on the market, unique with its user-friendly digital interface. It is provided with stainless steel rails and door, painted in silver colour. The outer feeling is the highly appreciated Elegance design, provided with the typical product line’s features as the easy fix installation solution. Equipped with a state of the art BD 1.4F Secop compressor, it requires minimum installation space.
Drawer 30 Black, White or Silver: A drawer refrigerator with a user-friendly digital interface, specified for internal applications. It is provided with steel rails and black painted steel door. The outer feeling is the highly appreciated Elegance design, provided with the typical product line’s features as the easy fix installation solution. Equipped with BD 1.4F Secop compressor, it requires minimum installation space.
DRAWER 49 INOX: A new, space-saving, drawer unit with stainless steel front door. The interior is designed to suit international cans and food packs with two robust drawers, conventional international sizes of integrated adjustable bars, freezer compartment and internal blue LED light.
DRAWER 55 frost-free Freezer INOX: A 55 liters capacity stainless steel front opened drawer freezer. This model combines innovative stainless steel design with the most modern technology such as automatic defrost which allows having home comfort on board. The DR 55 F is equipped with an internal fan for temperature constant control and a sequence of 5 LED lights for blue internal light.

Drawer-16-inox
DRAWER 30
Drawer-49-inox
Drawer-55-f-frost-free-inox
BI16
BI-29
BI-41
BI-53
BI-75
BI 172

Built In Boxes:

Built-In Cooling Boxes: flexible cooling boxes installation possibilities
Indel Webasto Marine Built-In boxes allow an optimised use of space on board thanks to the top-loading access to the interior. They are extremely flexible in size and design.
Product specifications
Easy access to food and drinks from the top
Numerous installation opportunities ; Extremely space-saving
Customised solutions of the top lid for a perfectly adapted design
12/24 V Danfoss / Secop compressor (remote on demand)
Plastic or stainless steel inside lining to avoid any damage even after contact with salt water
Roller slides available for BI 29
Evaporator integrated in the foam allows easy cleaning (except BI 40)
Customisable top
Options: AC/DC, water cooling, Smart Energy Control
Boxes Available:
BI 16: The BI 16 is a refrigerator box equipped with the space saving Secop BD 1.4F Micro compressor solution. The upper lid with inner recess allows big bottle storage. Temperature range from 0°C to +10°C. It combines great usability to high development standards, thanks to its easy to use digital display and to a “splash proof” IPX5 front protection.
Built-In Box BI 29 DUAL: The BI 29 is a refrigerator or freezer box with stainless steel inner lining and plastic bottom section. It offers a range of +10 °C to -12 °C. Equipped with roller slides (optional) the box can be used as a drawer.
BI 36: The BI 36 is a top loading refrigerator box equipped with Secop BD35F 12/24V DC compressor. The product is meant to be integrated into customer’s furniture and customized in finishing via the upper lid, granting safe hinging according to product application type and layout specifications. Temperature range from 0°C to +10°C. It combines great usability to high development standards.
Built-In Box BI 40: The BI 40 is a built-in refrigerator box. It is equipped with an L-shaped evaporator. The fan-cooled compressor is mounted on the side. The BI 40 is also available with ASU. Other compressor options as SP or Magnum are also available.
Built-In Box BI 41 DUAL: The BI 41 is a refrigerator or freezer box with stainless steel inner lining, plastic bottom section and a wire basket. It offers a range of +10 °C to -10 °C. The fan-cooled compressor is mounted on the side, or easily repositioned up to 1.5 meter away. Other compressor options as SP or Magnum are also available.
Built-In Box BI 53 F: The BI 53 F is a built-in freezer box with stainless steel inner lining, plastic bottom section and a wire basket. It offers a range of 0 °C to -20 °C and is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meters away. Other compressor options as SP or Magnum are also available.
Built-In Box BI 75: The BI 75 is a built-in fridge box with stainless steel inner lining, plastic bottom section and one wire basket. It is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meter away. Other compressor options as SP or Magnum are also available.
Built-In Box BI 92 DUAL: The BI 92 is a built-in fridge or freezer box with stainless steel inner lining, plastic bottom section and three wire baskets. It offers a range of +10 °C to -20 °C and is equipped with interior light. Its fan-cooled compressor unit is mounted below but easily repositioned up to 1.5 meter away. Other compressor options as SP or Magnum are also available.
New BI172 DUAL Fridge/Freezer Combination: The Built-In 172 DUAL is a combined cooling solution 130 liter fridge & 38 liter freezer or 172 liter fridge only, capable to work on a multiple use base. It is a fridge/freezer or a fridge only device to be nicely integrated into a furniture assembly. The innovative concept at the base of the BI172 product development is modularity both in use and in application. It is possible to change the product’s functions according to the customer needs, since it has been specified to cover all market/customer requirements.

Ice Makers and Wine Cellars:

IceMakers:
Serving drinks on board is great. But being able to serve them with ice cubes is even better. By offering two different models with two different technologies, customers can choose between clear ice and white ice. The model IceDrink Clear uses the spray technology for up to 18 kg of clear ice, while the IceDrink White produces up to 8 kg of white ice cubes.
Volume: 4 liters: IceDrink Clear – The IceDrink Clear is the perfect solution to produce fresh clear ice on board.
Volume: 12 liters: IceDrink White – The IceDrink White produces up to 8 kg of white ice cubes.
Volume: 12 liters: IceDrink White INOX – The IceDrink White INOX is equipped with reliable white ice technology and comes with completestainless steel design.
Volume: 12 liters: Ice Maker Low Profile – The Low Profile White Ice Maker brings Isotherm reliability to a compact design that fits shorter height dimensions.
Volume: 14 liters: IceDrink White BI29 – The Isotherm BI29 Top Access Ice Maker can be mounted as a counter top box or as a drawer.
Wine Cellars:
Indel Webasto Marine offers cellars of two different sizes. Both 23 and 35 bottles wine cellars can be built into the dressers or columns of modular furniture with no alteration of furniture design. For a perfect integration, the profile of the door is totally lined up with the doors of the furniture.
Divino 35 – The Divino 35 comes with a big storage room for 35 bottles and 5 internal wooden shelves.
Divino 23 – With three wooden shelves the Divino 23 can keep 23 bottles in its inside.

IceDrink-Inox
Icemaker-low profile
wine-cellar-divino35
wine-cellar-divino23
Water heater - Basic
Water Heater - Slim
Water Heater Spa
Water Heater Square

Isotemp Marine Water Heaters:

The Indel Webasto Marine Isotemp water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. The marine water heaters are very robust, both the water tank and external cylinder are made of stainless steel in Basic and Slim models while new SPA range features the same internal tank in stainless steel and an outer casing made of high quality polypropylene. The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.
Water Heaters Basic: Volume: 24 – 75 liters – 
Water Heaters Slim: Volume: 15 – 25 liters

Water Heaters Spa: Volume: 15 – 40 liters – The Isotemp Spa water heaters are available in 5 sizes ranging from 15 to 40 liters capacity (15, 20, 25, 30 & 40).
They match high marine quality standards such as a stainless steel inner tank, a robust polypropylene casing and a 6 bar safety valve.
Water Heater Square: Volume: 16 liters – The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design. It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.