Victron Panels and System Monitoring
Large Scale Battery and Power Monitoring
VE.Net: ultimate power management and control
Nothing should be complicated and it is Victron Energy’s aim to make life on board straight forward as well as ensuring your maximum comfort. To enjoy the benefits of having power anywhere and any time you need a sophisticated system but this would be self defeating if you needed an engineering degree to make it all work. VE.Net gives you clear and simple information and control of your systems, even when you are not there, with the optional VE.Net Connectivity (GSM/GPS) Module!
Battery Monitors
BMV-600
The BMV-600 is Victron's new high precision battery monitor. The essential function of a battery monitor is to calculate amp-hours consumed and the state of charge of a battery. Amp-hours consumed is calculated by integrating the current flowing in or out of the battery.
- Highest resolution: 10mA (0,01A) with 500A shunt.
- Lowest current consumption: 1mA.
- Easiest
to wire: the BMV 601 comes with shunt, 10 meter RJ 12 UTP cable and 2
meter battery cable with fuse. No other components needed.
- Easiest to install: separate front bezel for square or round appearance; ring for rear mounting and screws for front mounting.
BMV-602
The BMV-602 has a second voltage measurement input. This input can for example be used to measure the voltage of a starter battery.It can also be connected via an RS232C port to an on-board computeror to your Global Remote permitting access through a GPRS connection.
VictronView Touch
The demand for luxury and
comfort on boats and vehicles grows every day. Unfortunately, more
luxury and comfort means a larger web of wiring and monitoring/control
panels. This web creates a confusing and inefficient situation for the
user. ED&D Technologies has developed a solution for this universal
problem: E-Plex.
Together with ED&D, Victron has developed the ‘VE.Bus to E-Plex protocol Converter’ (VEC).
This new product connects Victron equipment to the E-Plex network. The
result of a seamless cooperation between the Victron units and E-Plex
is simple power management of all inverters, Multi’s and Quattro’s.
With E-Plex, the user can turn the units on/off and set current limits
for the PowerAssist functionality. The power, voltages and values of
the AC and DC currents can be read out as well.
Remote Control Panels
Remotely controlling and monitoring your power equipment has never been easier. Our wide range of Victron remote control panels enables you to monitor your system and adjust its settings. See below for our range of panels.
Victron Global Remote
Obtaining system information wherever and whenever
The Global Remote is a modem which sends alarms, warnings and system
status reports to cellular phones via text messages (SMS). It can also
log data from Victron Battery Monitors, Multi’s, Quattro’s and
Inverters to a website through a GPRS connection. The usage of this
website is free of charge.
The idea is simple: you can use it to get SMS alarms from a Multi, a
Battery System, or both. When monitoring the usage of batteries, it can
be extremely helpful to receive under and overvoltage alarms; whenever
they occur. For this purpose, the Global Remote is perfect. A prepaid
SIM-card (for example) in combination with the Global Remote is
adequate for remotely monitoring your system.
Advanced usage: Monitoring historic data
Taking it one step further, an internet browser and -connection is all
you need to view all of the data online. You can simply create an
account on the website and add your modem(s). Subsequently you can
configure the GPRS connection, which will enable you to monitor the
historic data of several basic properties such as system voltages,
power levels and status information. All of this data is graphed. These
graphs are available in daily, weekly and monthly timeframes.
For a full and detailed list of Victron Panels and System Monitoring products available from Storm Force Marine in Hong Kong, please see the Victron Panels and System Monitoring website