Victron Inverters
Pure sinewave output, high peak power and high efficiency. Combined
Hybrid Switch Mode and Line Frequency technologies ensure the best of
both worlds.
Models range from 220 to 3000 VA. Higher output ratings
and 3-phase configuration can be achieved by means of a parallel
connect feature.
Phoenix Inverter 12 / 24 / 48 Volt
Phoenix Inverter Compact 12 / 24 Volt
Models range from 150VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split
phase and three phase configuration. Pure sinewave output, high peak
power and high efficiency.
Models range from 150VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration.
Related Products
Phoenix Inverter Control
This panel is intended for Phoenix inverters equipped with a UTP remote
monitoring and control socket. It can also be used on a Phoenix Multi
when an automatic transfer switch but no charger function is desired.
The brightness of the LED?s is automatically reduced during night time.
Only for models: 12/1200, 12/1600, 12/2500, 24/1200, 24/1600, 24/3000 UTP patch lead required.
Battery Alarm
An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.
UTP patch lead
Allows to connect Phoenix Inverter Control or VE Interface MK.1.
5M ASS030065000
10M ASS030065010
15M ASS030065020
Cable for Parallel connect
The Phoenix Multi Plus can be used in a parallel mode to do this a data cable is needed to synchronize the system.
Only for models: 12/1600 12/2500 24/1600 24/3000
VE Interface MK.2B
Every Phoenix Multi/MultiPlus is ready to communicate with a computer
through its RS-485 data port. All you need to link to your PC and be
able to set and read out all parameters is the data link as shown.
Moreover, all Victron Energy products equipped with an RS-485 data port
can easily be integrated in a computerised monitoring and control
system, such as VE.Net from Victron Energy.
Only for models: 12/800, 12/1200, 12/1600, 12/2500, 24/800, 24/1200, 24/1600, 24/3000
VE-Configure software and a UTP patch lead required.
For a full and detailed list of Victron Inverters products available from Storm Force Marine in Hong Kong, please see the Victron Inverters website