Victron Inverters

Chargers Inverters Transformers

Pure sinewave output, high peak power and high efficiency. Combined Hybrid Switch Mode and Line Frequency technologies ensure the best of both worlds.
Models range from 220 to 3000 VA. Higher output ratings and 3-phase configuration can be achieved by means of a parallel connect feature.

Victron Phoenix Inverter 12 / 24 / 48 Volt

Phoenix Inverter 12 / 24 / 48 Volt

Phoenix Inverter Compact 12 / 24 Volt


Models range from 150VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration. Pure sinewave output, high peak power and high efficiency.


Models range from 150VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration.

Related Products

Victron Phoenix Inverter Control

Phoenix Inverter Control This panel is intended for Phoenix inverters equipped with a UTP remote monitoring and control socket. It can also be used on a Phoenix Multi when an automatic transfer switch but no charger function is desired. The brightness of the LED?s is automatically reduced during night time.
Only for models: 12/1200, 12/1600, 12/2500, 24/1200, 24/1600, 24/3000 UTP patch lead required.


Victron Battery Alarm Battery Alarm An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.

Victron UTP Patch Lead UTP patch lead Allows to connect Phoenix Inverter Control or VE Interface MK.1.

5M ASS030065000
10M ASS030065010
15M ASS030065020


Victron Cable for Parallel connect Cable for Parallel connect The Phoenix Multi Plus can be used in a parallel mode to do this a data cable is needed to synchronize the system.
Only for models: 12/1600 12/2500 24/1600 24/3000


Victron VE Interface Mk 2B VE Interface MK.2B Every Phoenix Multi/MultiPlus is ready to communicate with a computer through its RS-485 data port. All you need to link to your PC and be able to set and read out all parameters is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port can easily be integrated in a computerised monitoring and control system, such as VE.Net from Victron Energy.
Only for models: 12/800, 12/1200, 12/1600, 12/2500, 24/800, 24/1200, 24/1600, 24/3000
VE-Configure software and a UTP patch lead required.