Attwood Marine - Pumps. Lights, Springs and Seats - and much more
What is the Attwood difference?
For over 100 years Attwood has been proud to serve the parts and accessories needs of the marine industry. Attwood has spent considerable time and resources talking to customers and asking them what they feel is important. The top three answers always include SAFETY and RELIABILITY, and while Attwood understands that price is a consideration, they are also aware that many of the items they offer to the market can have a direct effect on the reliability of a boat and the safety of its occupants.
Quality products that are well engineered and designed, which give reliable performance for a hassle free boating experience. All at a reasonable price. That's the Attwood difference.
Sahara Bilge Pumps
Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.
The S1100 is Attwood’s most powerful and efficient high capacity automatic pump, and is for larger boats and yachts. It removes 1100 GPH at open flow, and 973 GPH at 3.3' head. The S1100 also features a 1-1/8" hose outlet.
Tsunami Dual Outlet Aerator Pump
Proven Performance. The Tsunami Dual Outlet Pump’s second outlet is integrated into the pressure chamber, so it looks and pumps like part of the aerator. Beneath the standard 3/4" barbed outlet, there's a second hose-threaded outlet on the pressure housing. Both outlets are engineered for the precise position and angle to deliver optimum performance. With the Tsunami Dual Outlet Aerator Pump you get twice the value because it is a true multifunction pump. You get separate outlets allowing you to run two live-wells or you can run a live-well and a separate low-pressure wash down outlet.
Shower Sump Pumps
Attwood's shower sump systems deliver the performance you've been asking for. Choose from three sizes - Standard Box with 400+ GPH, Standard Box with 650 GPH, or Large Box for reduced cycle time with 650 GPH output. All three models offer fast water flow into sump and quick installation. The new lid includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent air locks.
Float Switches with optional cover
The Attwood Automatic Float Switch converts any bilge pump that draws 12 amps at 12 VDC, 6 amps at 24 VDC, or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle and incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level.
The Float Switch produces no large voltage drop, which reduces bilge pump
output, unlike some reed switch designs. Its wire leads do not flex or
hinge with the float as on some competitive models. The integral cover
dampens bilge sloshing to reduce pump cycling, and prevents debris
interference. A sealed switch mechanism resists moisture, fume ignition
and electrical shock.
The float switch installs directly onto the rear slots of the V-Series pump bracket and features a convenient test knob to test pump operation. This product contains no mercury, enabling use in areas with strict Environmental or Health and Safety regulations.
Blowers
Patented in-line design provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. The unit easily installs with #10 fasteners and comes with two tie straps, and 16-gauge tinned and caulked copper wire leads with optional MP1 moulded rubber connectors.
The improved 3" system design includes; nickel-plated motor can for corrosion resistance, stiffening ribs to reduce housing distortion and a motor cap to seal both the wires and motor for increased water resistance.
Stainless Steel Navigation Lights
Attwood's 2-Mile Stainless Steel sidelights are made with a rugged stainless steel cover for outstanding resistance to impact and corrosion. Designed for use on boats up to 65.6 ft. (20 meters), these lights feature smooth contour lines to prevent snagging, stainless steel electrical contacts which will not corrode, a compact overall size allowing installation on confined decks, tinned-copper wire leads for easy installation and corrosion resistance and USCG certified two-mile 225° visibility.
2 Mile Vertical Mount Side Lights
Quasar lights are for use on boats up to 65.6 ft. (20 meters) and have been specifically designed for easier installation, maintenance, and efficient light output. Available in a variety of finishes, with smooth contours to prevent lines from snagging, the quasar series feature lenses tuned to maximum sensitivity of the human eye for optimum visibility.
Quasar
lights attach directly to the deck with concealed #10 fasteners or to
one of the optional Sidelight Snap-On Bases. This all new mounting
solution makes Quasar sidelights even easier to install and maintain.
The base unit attaches to the deck with screws, then your Quasar lights
simply snap on or off. The 1/4" base is designed for contoured decks. A
single external stainless steel lock screw attaches the cover to the
base permitting easy disassembly for servicing.
Anchor/Masthead light
3-mile, 360° post mounted light for use on boats up to 39.4 feet (12 meters). The cam-lock base installs with two #10 fasteners (not included). Each light includes 9-watt wedge base lamp.
Vertical, horizontal and rail mounting plates are available to make installation and use easy. Simple one piece lens helps to seal out water. Wiring is concealed and protected at the base of the unit, and the cam lock is robust, positive locking, quick and easy to use.
Gas Springs/SpringLift Products
Attwood is the exclusive supplier of SpringLift gas springs for marine, RV and industrial applications. Specify SpringLift gas springs to lift, hold open, and smoothly lower hatches, covers, lids and doors. They are designed for industrial use and can withstand tough marine environments as well. Attwood offers complete mounting systems.
More boat builders choose Attwood Gas Springs as original equipment than all other brands combined. That's because the nitrided rod finish has established a marine industry standard that is unmatched for reliability and corrosion resistance.
Now Attwood introduces a line of stainless steel gas springs that offer even more durability. The pressure tubes and rods are made of a super-tough #316 stainless steel alloy. All other exposed components are stainless steel or marine-grade composite.
VisionAir Seat
The VisionAir seating system is built for hardwearing comfort in all weathers, and features up to the minute styling with Elastomeric Mesh Technology (EMT) in the backrest and seat. The seat’s EMT fibres are non-bonded so they flex in all directions for body-fitting comfort and the open-weave fibres are ventilated to keep you cool and dry. Attwood's patent-pending carrier technology tensions and moulds the EMT fibres into ergonomic contours.
A range of arm rest options are available to make your VisionAir your very own, and a wide variety of available fabric colours allow it to integrate seamlessly into your boat’s interior design scheme.
For a full and detailed list of Attwood Marine products available from Storm Force Marine in Hong Kong, please see the Attwood Marine website